Optika Italy H Serie Manual De Instrucciones página 6

7. C-HUB4K Basic features
C-HUB4K is a multiple interfaces (HDMI + USB2.0 + LAN + WiFi + SD card) CMOS camera.
HDMI, USB2.0 and LAN are used as the data transfer interface to HDMI display or computer.
For HDMI output, the Camera Control Panel + Measurement Toolbar and Camera Control Toolbar are overlaid on the HDMI
screen when the mouse moves to the related region.
In this case, the USB mouse can be used to set the camera, browse and compare the captured image, play the video and
perform the measurement.
For USB output, there are three possibilities:
1. Connect USB flash drive to save pictures and videos.
2. Connect 5G WLAN modules to transfer image wirelessly in real time (AP/STA)
3. Connect computer with USB connection to transfer image in real time.
For LAN output, the camera can be connected with an Ethernet cable directly to a PC or to a router.
From here the ProView/LiteView software can control each camera function.
7.1 Quick Instructions for C-HUB4K camera
Before turning on the camera, please connect the standard C-mount camera to the camera adapter and insert it into the
microscope's trinocular port.
① USB mouse connector
② USB2.0 connector
③ USB Video connector
④ HDMI connector
⑤ LAN connector
You can use the C-HUB4K camera in 5 different ways. Each application requires different hardware environment.
7.1.1 HDMI Mode
1. Plug the HDMI cable into the HDMI port
2. Plug the USB mouse into USB Mouse port
3. Plug 12V/1A power adapter into DC 12V slot
⑧
• The LED Indicator
4. Insert SD card into SD Card slot
videos.
5. Press ON/OFF Button
• The LED indicator will turn into blue.
6. Move mouse cursor to the left side of the video window, a Camera Control Panel will appear. It includes Manual/ Auto-
matic Exposure, White Balance, Sharpness and other functions, please refer to 8.1 for details.
7. Move mouse cursor to the bottom of the video window and a Camera Control Toolbar will appear. Operations like Zoom
In, Zoom Out, Flip, Freeze, Cross Line, Comparison and so on can be achieved. Please refer to 8.3 for details.
8. Move mouse cursor to the upper side of the video window, a Measurement Toolbar with calibration and other measure-
ment tools will appear, please refer to 8.2 for details. The measurement data can be output with *.CSV format.
①
⑤
Fig. 1 - C-HUB4K Rear Panel
④
to connect the C-HUB4K camera to HDMI display.
①
⑨
will turn into red.
⑥
or a USB flash disk into USB2.0 port
⑦
to turn on the camera.
②
③
⑥
⑦
⑥ SD card slot
⑦ ON-OFF button
⑧ LED indicator
⑨ Power supply plug
to get control of the camera by using built-in software HDMIPRO.
to supply power for the camera.
Page 6
④
⑧
⑨
②
for saving captured images and recorded