Optika Italy H Serie Manual De Instrucciones página 19

8.3.3 Setting > Network > WLAN
WiFi Mode AP/STA mode to select
Channel for the AP mode and SSID for the STA mode. Here, the SSID is the router's SSID
Channel/SSID
Password Camera Password for the AP mode. Router Password for the STA mode
8.3.4 Setting > Measurement
This page is used for the definition of the Measurement Object properties
Global Used for setting digits behind the decimal point for measurement results
Calibration Line Width
Color
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Curve:
Left-click the beside the measuring patterns mentioned above will unfold the corresponding attribute settings to set the
individual property of the measuring objects
Fig. 14 - WLAN Network Settings Page
Fig. 15 - Measurement Settings Page
Used for defining width of the lines for calibration
Used for defining color of the lines for calibration
Used for defining shape of the endpoints of lines for calibration
Type:
Null: Means no endpoints
Means rectangle type of endpoints. It makes alignment more easily
Rectangle:
Page 19