Subnet Mask is used to distinguish network domain from host domain in 32-bit IP address
Subnet Mask
A default gateway allows computers on a network to communicate with computers on another net-
Default Gateway
work. Without it, the network is isolated from the outside. Basically, computers send data that is bound
for other networks (one that does not belong to its local IP range) through the default gateway;
Network administrators conFig. the computer's routing capability with an IP range's starting address
as the default gateway and point all clients to that IP address
Uncheck the DHCP and select the Unicast item, user still need to set the IP address, Subnet mask and Default Gateway
as shown below:
Uncheck the DHCP and select the Multicast item, user still need to set the IP address, Subnet Mask and Default Gateway
as shown below:
Fig. 12 - Manual DHCP in Unicast Settings Page
Fig. 13 - Manual DHCP in Multicast Settings Page
Page 18