Publicidad
Idiomas disponibles
Idiomas disponibles
ADVANCED FUNCTIONS
16
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
G
1
Press
to turn on/off the display screen.
!
NOTE
This function may not be supported,
depending on the model.
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
In case of turning On
1
Open the front panel.
- Lift up both sides of the cover slightly.
* Features may change according to the type
of model.
2
Press the On/Off button.
* Features may change according to the type
of model.
3
Close the front panel as soon as you turn
on/off button.
- Lift down both sides of the panel slightly.
- For cooling and heating models, the oper-
ation mode changes based on the room
temperature as indicated in the table
below.
Room temp.
Set temp.
Below 21°C
24°C (75.2°F)
(69.8°F)
Above 21°C
(69.8°F) and
23°C (73.4°F)
below 24°C
(75.2°F)
Above 24°C
22°C (71.6°F)
(75.2°F)
- Cooling-only models are set to 71.6°F
(22°C).
Operation
mode
Heating
operation
Dehumidify-
ing operation
Cooling
operation
Publicidad
