Chauvin Arnoux MH 60 Manual De Instrucciones página 30

Oscilloscope clamp
7.1. Replacing the storage battery
Find Quality Products Online at:
Procure the replacement storage battery (ref. P0 1296049).
Disconnect the USB charger and remove the clamp from any circuit.
Withdraw the two screws closing the housing.
Identify the two-point storage battery connector and disconnect it.
Lift the storage battery clear and unclip it.
Refitting: proceed in the reverse order.
29
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com