Publicidad
Idiomas disponibles
Idiomas disponibles
Alarm
Setting the alarm time
1. Press and hold the
alarm symbol
2. Use the button
The indication of the displayed values changes faster by holding
3. Press
.
The minute indicator for the alarm time blinks on the display.
4. Use the button
5. Finally, press
to complete the setup process.
You can check the set alarm time by briefly pressing the
Waking up
At the set time, you will be woken by an alarm signal, which will become more intense
as the waking time increases. The alarm symbol
Interrupting the alarm for 24 hours
− Press any button (except
After 24 hours, the alarm will be triggered again.
Auto-stop function
If you do not press a button, the alarm switches off automatically after 2 minutes. After
24 hours, the alarm will be triggered again.
Switching the alarm function off and on
Starting from normal time display:
− Press the
button once.
Once the alarm symbol
alarmed any more. Pressing
CK 2302 DCF radio-controlled clock
button until the hour digit flashes on the display and the
is displayed.
or
to set the desired alarm hour.
or
to set the desired alarm minute.
, as it disables the alarm function) to stop the alarm.
goes out, the alarm function is disabled and you will not be
again activates the alarm function.
also flashes on the display.
Alarm
or
.
button once.
25
Publicidad
