pumping breast milk does not reduce or remove the risk of transmitting the virus to your baby
through breast milk.
•Do not operate a motor vehicle while using the electric breast pump.
•Do not attempt to modify or repair the product by yourself when damage occurs. Instead you must
contact an authorized service or the sales agent, from whom you have purchased the electric breast
pump.
•This appliance is intended for repeated use only by one user.
•Do not allow children or pets to play with the product, its adaptor or the accessories included in the
set.
•Before each use inspect the pump and the adaptor for signs of damage. Do not use them if you find
any damage.
•Do not use spare parts which are not the original ones supplied by the manufacturer or importer.
•This product is a personal care item and should not be shared between mothers.
•Do not attempt to remove the pump body from your breast while under vacuum. Turn the unit off
and break the seal between your breast and the silicone pad with your finger, then remove the pump
from your breast.
•Never use while pregnant as pumping can induce labor.
•Do not leave and do not store the product in a place with very high room temperature or under
direct sunlight.
•The product should not be left unattended when plugged into the electrical wall socket.
•Before starting the breast pump, first connect the adapter to the electric breast pump, then securely
connect the adaptor to the electric socket.
•Wash, rinse and sterilize the appropriate pump parts before each use.
•Never wash and sterilize the electrical parts of the product – the motor of the pump and the AC
adaptor in order not to cause permanent damage to the product.
II. PARTS - PD
1.Safety Cover; 2.Silicone breast pad; 3.Cap; 4.Piston; 5.Connecting tube; 6.Pump body; 7.Air hole; 8.Valve;
9.Pumping mechanism (motor); 10.Feeding bottle; 11.Charger/ adapter; 12. USB cable;
III. DISPLAY - D
A. Massage mode; B. Suction mode; C. Time; D. Frequency; E. Levels; F. Symbol of mode
IV. PANEL - P
A. Level decreasing; B. Mode switch; C. Turning on/off; D. Level increasing; E. Frequency;
V. ELECTRICAL CHARACTERISTICS
•Battery voltage and capacity: 5 VDC/ 2000 mAh
•BATTERY CHARGER: Input: AC115V – 230V; Output: 5VDC, 1.0 A
•Charging time: 100 minutes
•Method of control: Touchscreen
•Display: LCD
VI. CHARGING THE ELECTRIC MOTOR OF THE PUMP
1. Insert the chargers' SUB cable to the charging socket of the pumping mechanism.
2. Then plug the charger into an electrical outlet.
3. During charging do not use the pump so that to ensure the full charge of its battery.
13