Publicidad
Idiomas disponibles
Idiomas disponibles
•Check whether there are any damaged parts.
• If you cannot turn the pump on, check whether it is connected to the adapter and
whether it is plugged in the electricity grid.
2. No milk is being expressed:
• Check point 1
• Ensure the pump is correctly assembled and that suction is being created.
• Relax and try again.
• There are 15 levels of expression, the maximum power is 42KPa; the average suction power of the baby is 20
– 30 kPa. We recommend you increase the levels gradually; the most suitable level is the one, with which the
suction is painless. The following is NOT true: the stronger – the better. Too strong suction can hurt the
nipple.
3. Pain in the breast area where there is expression:
• If you feel pain and no milk flows during expression, maybe your mammary gland is blocked. This case may
result in mastitis. Contact a physician promptly. The complete milk expression will have good effect on mastitis
protection.
• You may be using too high level of suction. You do not need to use all the suction that the pump can
generate.
• Try to adjust the proper suction and frequency.
• Consult your health professional/ breastfeeding advisor.
4. Flow is too slow:
The speed of milk flow differs for every woman. The higher degree and level of expression do not mean faster
flow of milk. This depends on many factors – constitution of the breast, level of pass ability, even the mood.
The more regularly you use the breast pump, the quicker and easier the flow of milk. Before you start using it,
put a warm cloth on your breasts and use the massage mode for about 5 minutes before you switch to
expression mode.
5. Milk is dropping down the silicone massage pad:
• Remove and refit again the massage pad in order to ensure it is firmly attached to the central part of the
funnel.
• Try to lean slightly forward.
6. Cracking and discoloration of the pump/ feeding bottle parts:
Avoid contact with antibacterial or abrasive detergents/ cleaners as they can damage the plastic. Combination
of detergents, cleaning products, sterilizing solution, softened water and temperature fluctuations can cause
plastic to crack. If this occurs, please, do not use. The pump body and the breast milk containers are
dishwasher safe but the food colorings may cause discoloring them. Keep the product out of direct sunlight as
prolonged exposure
may lead to discoloration.
7. Lost or broken parts:
For spare parts contact an authorized service center or the sales agent from whom you have purchased the
product. Do not use spare parts, which are not approved or supplied by the manufacturer.
•Do not attempt to repair or to modify the product, because this may endanger Your and Your baby's health.
Thank you for purchasing this product! Use it carefully and follow the instructions from this manual in order to
ensure the safe use and maintenance of the electric breast pump. When having questions regarding the use,
maintenance and repair of the product, please, contact the importer or sales agent from whom you have
purchased the product.
Contents: PP and silicone
PRODUCED FOR CANGAROO
Importer: Moni Trade LTD
Address: Dolo 1 str., Trebich, Sofia, Bulgaria; Tel.: 00359 2 936 07 90
17
Publicidad
