4.
SAFETY
It is recommended to carefully read the
instructions and warnings contained in this
manual
before
using
information
contained
fundamental for the safety of use and for machine
maintenance.
!
Keep this manual carefully so that it can be
consulted when necessary.
The electric plant has been designed in
compliance
with
the
Standard.
,
Specific adhesives highlight the presence of
mains voltage in the proximity of areas (however
protected) with risks of an electrical nature.
!
Before the connection, ensure the presence
of an omnipolar switch with minimum contacts
opening equal to 3 mm in the mains power supply
upstream from the appliance (requested for
appliances supplied without plug to connect to the
fixed plant).
In the design and construction phase, the
manufacturer has paid particular attention to the
aspects that can cause risks to safety and health
of persons that interact with the appliance.
Carefully read the instructions stated in the
manual and those applied directly to the machine,
and particularly respect those regarding safety.
the
appliance.
The
in
the
manual
is
IEC
EN
60335-2-24
Do not tamper with, evade, eliminate or by-pass
the installed safety devices. Failure to comply with
this requisite can lead to serious risks for personal
health and safety.
It is recommended to simulate some test
manoeuvres to identify the controls, in particular
those relative to switch-on and switch-off and their
main functions.
The appliance is only destined for the use for
which it has been designed; any other use must
be considered improper.
The manufacturer declines all liability for any
damage to objects or injury to persons owing to
improper or incorrect use.
All maintenance interventions that require
precise technical skill or particular ability must be
performed exclusively by qualified staff.
In order to guarantee hygiene and protect the
foodstuffs from contamination, the elements that
come into direct or indirect contact with the
foodstuffs must be cleaned very well along with
the surrounding areas. These operations must
only be performed using detergents that can be
used
with
foodstuffs,
products or those that contain substances that are
harmful to personal health.
In the case of prolonged inactivity, as well as
disconnecting all the supply lines, it is necessary
to accurately clean all internal and external parts
of the appliance.
5
ENGLISH
avoiding
inflammable
GB