Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
7
Installing the soap dispenser
□ To install the optional soap dispenser (I), unscrew the top of
the soap dispenser (I) from the plastic soap bottle (J) and
remove the mounting nut (K), metal washer (L), and rubber
washer (M).
□ From above the sink, insert the soap dispenser (I) into the
fourth hole opening in the sink.
□ From underneath the sink, place the rubber washer (M)
and metal washer (L) onto the shank of the soap dispenser
(I) and then thread the mounting nut (K) onto the shank to
secure the soap dispenser (I) to the sink.
I
M
L
K
J
8
Connecting the supply lines
□ Attach the end of the hot water (red stripe) and cold water
(blue stripe) water supply lines (D) coming from the faucet
body (A) to the hot and cold water shut-off valves and
tighten with a wrench. Do not overtighten.
CAUTION: Ensure the supply lines do not kink, twist or
bend during installation. Do not use if there are visible signs
of damage.
D
RED LINE
HOT
COLD
SHUT-OFF
VALVES
7
Please contact 1-855-HD-GLACIER for further assistance.
BLUE LINE
HOMEDEPOT.COM/GLACIERBAY
Publicidad
