Silvercrest SKRD 30 A1 Instrucciones De Uso página 98

Waken with radio
GB
MT
Switching the alarm off
When the wake time has arrived
96
If you want to be woken by the radio, before activating the wake time carry out
the following settings:
♦ Switch the radio on by pressing the On/Off
♦ Select the station with which you want to be woken (see section
Station setting).
♦ With the VOLUME
Volume settings).
♦ Switch the radio off by pressing the On/Off
♦ To select "Radio" for the respective alarm press the Alarm1 button
the Alarm2 button
symbol appears.
Prerequisite: The device is in the operational mode clock/standby operation.
♦ To switch off the respective alarm press the Alarm1 button
button several times in succession until no symbols are shown in the
9
display .
3
With the setting "Wake with alarm tone" a fourfold signal tone sounds
in intervals of 2 seconds. The volume of the signal tone will continually increase
until the maximum volume has been reached. The duration of the wake signal is
restricted to 10 minutes.
With the setting "Wake with radio" the radio will switch on. The previously
selected station will be activated for a maximum of 60 minutes at the set volume.
♦ Press the button Snooze/Timer
NOTICE
► The repeat wake function is possible up to 60 minutes after the set wake
time has arrived.
♦ Press the Alarm1 button
alarm.
NOTICE
► The alarm becomes active again when the next wake time has arrived
(i.e. on the next day).
Handling and operation
knob set the desired volume (see section
14
several times in succession until, in the display
9
to activate a repeat wake after 9 minutes.
14
or the Alarm2 button
8
button.
4
button.
4
8
or the Alarm2
8
to end the current
9
SKRD 30 A1
or
3 , the