-
Crevice tool and small brush.
Note: Make sure the suction opening of the small brush points towards the
holder.
using the appliance
Pull the cord out of the appliance and put the mains plug in the wall
1
socket.
Press the on/off button on top of the appliance to switch on the
2
appliance.
During vacuum cleaning, you can adjust the suction power with the
3
knob on top of the appliance.
Use maximum suction power to vacuum very dirty carpets and hard
-
floors.
Use minimum suction power to vacuum curtains, table carpets, etc.
-
If you want to pause for a moment, insert the ridge on the nozzle
4
into the parking slot to park the tube in a convenient position.
storage
Switch off the appliance and remove the mains plug from the wall
1
socket.
English
11