Super Clean Air filter, Super Clean Air HEPA 12 filter or Ultra
Clean Air HEPA 13 filter
This appliance is equipped with either the Super Clean Air filter, the Super
Clean Air HEPA 12 filter or the Ultra Clean Air HEPA 13 filter. These filters
are located in the back of the appliance.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the filter with an original Philips filter of the correct
type (see chapter 'Ordering accessories').
Super Clean Air filter
The Super Clean Air filter filters a large part of the smaller particles from
the exhaust air with its electrostatically charged fibres.
Replace the Super Clean Air filter every six months. This filter is not
washable.
Remove the filter grille.
1
Remove the old filter.
2
Insert the new filter into the appliance.
3
Reattach the top of the filter grille and push the bottom corners
4
until they snap home ('click').
Super Clean Air HEPA 12 filter
The Super Clean Air HEPA 12 filter is able to remove 99.5% of all particles
down to 0.0003mm in size from the outlet air. This not only includes
normal house dust, but also harmful microscopic vermin such as dust mites
and their excrements, which are well-known causes of respiratory allergies.
Replace the Super Clean Air HEPA 12 filter every six months. This filter is
not washable.
To replace the Super Clean Air HEPA 12 filter, follow steps 1-4 of section
'Super Clean Air filter' above.
Washable Ultra Clean Air HEPA 13 filter
The Ultra Clean Air HEPA 13 filter is able to remove 99.95% of all particles
down to 0.0003mm in size from the outlet air. This not only includes
normal house dust, but also harmful microscopic vermin such as dust mites
and their excrements, which are well-known causes of respiratory allergies.
Clean the washable Ultra Clean Air HEPA 13 filter every 6 months. You can
clean the washable Ultra Clean Air HEPA 13 filter max. 4 times. Replace
the filter after it has been cleaned 4 times.
English
15