Casals CJS2050B Manual Del Usuario página 8

ENGLISH
CJS2050B
20V SET
CORDLESS JIG SAW
ORIGINAL INSTRUCTIONS
Dear Customer,
Many thanks for choosing to purchase a Casals
brand product. Thanks to its continuous effort,
our innovation and the strictest quality controls,
Casals develops electric Power Tools for the
toughest jobs.
GENERAL POWER TOOLS
SAFETY WARNING
- WARNING Read all safety warnings
and all instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
- Save all warnings and instructions for future
reference.
PRODUCT DESCRIPTION
AND SPECIFICATIONS
DESCRIPTION
A. Safety lock
B. On/Off Switch
C. Soft grip handle
D. Battery release button
E. Battery
F. Dust extraction port
G. Blower selector
H. Aluminum base
I. Pendulum depth selector
J. Pendulum
K. Quic-fix chuck for saw blades
L. Guide screws
M. Guide
N. Tilting base screws
O. Plug socket
P. Battery charging indicator
Q. Charger
R. Charger plug
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTALLATION
CHARGING THE BATTERY
- Caution: A new battery is not fully charged and
must therefore be charged before the appliance
is used for the first time.
- Plug the charger (Q) into the mains.
- Connect the charger (R) to the jack using the
socket on the battery. The socket is located at
the lower/back part of the appliance.
- When the battery is charged disconnect the
charger from the mains supply.
- NB: Do not use the appliance while it is
connected to the charger.
- NB: For a long battery life, it is advisable to
charge the battery, before it runs out completely.
HOW TO CHECK THE BATTERY'S CHARGE
LEVEL:
- Press the battery charge level indicator button,
the pilot lights that indicate if it is charged will
light up.
- If all three pilot lights come on this means that
the appliance is fully charged.
- If only two of the pilot lights light up this means
that the battery is half charged.
- If only one pilot light lights up this means that
the battery has very little power remaining.
- If no pilot light lights up, this means that the
battery is completely flat.
ASSEMBLING THE BATTERY/S
- Caution: During the handling of batteries, do
not touch both poles at the same time, as this
will provoke the partial discharge of the stocked
energy therefore affecting longevity.
- Check that the plastic covering that protects the
battery has been removed (some batteries are
sold with a protective covering).
- Put the battery in its compartment, respecting
the polarity (Fig.1).
- N.B. When changing the batteries, the
configuration of the appliance will be removed,
and you will need to reset the parameters of the
appliance.