Casals CAG2050B Instrucciones De Uso página 19

CAREFUL! The disc doesn't stop automatically.
Don't let the angle grinder from your hands
until the disc is completely stopped.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Remove the battery from the appliance.
Clean the appliance.
Store the appliance in a dry place avoiding
dust.
MAINTENANCE AND CARE
Inspect the mounting screws: regularly inspect
all the mounting screws and ensure they are
firmly tightened. Should any screw be loose,
immediately tighten it Failure to do so could put
you at serious risk.
Motor maintenance: always take the greatest
care over this and make sure that the motor
winding is not damaged and does not become
wet with oil or water.
The vents should always be kept clean and
free of obstacles.
Clean the machine thoroughly after each use.
Blast the motor regularly with compressed air.
Application
Facial grinding
Peripheral Grinding
CLEANING
Disconnect the battery from the appliance and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
SUPPLIES
Supplies can be acquired from distributors and
authorised establishments (such as filters, etc.)
for your appliance model.
Always use original supplies, designed
specifically for your appliance model.
Accessories and guards for application:
Accessory types
Wheel types 27, 28, 29
Wheel Types 6, 11
Wheel type 1, 4
Cones and Plugs
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
If the connection to the mains has been
damaged, it must be replaced, take the
appliance to an authorised technical support
Guard types
Type B and Type C
(Grinding or combination
wheel guard)
Type D (Cup Wheel Guard)
Straight grinder Wheel Guard
None