Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Draw end of bunch with black/green, grey/red cables, (brown and blue/red cables only in 13-polar set) to right
standing lights and connect cables to empty contact near lamp casing according to the following description:
black/green
grey/red
brown (13-polar)
7.
Only for 13-polar set. Disconnect 6-input joint in vehicle from right standing lights and remove contact located on
black cable (reversing lights) using a suitable tool. Open secondary protection of joint, unlock and remove cap on
black cable.
a) Install end located on black cable and secure it in supplied 1-input casing,
b) Connect joint fastened in such a way to suitable joint of connection bunch,
c) Put remaining contact located on
Reconnect joint to standing lights.
8.
Draw remaining end of bunch to left standing lights, black/white, black/red, grey/black cables and additionally
(
, brown cables in 7-polar set), and connect to empty contacts near lamp casing according to
the following description:
black/white
black/red
grey/black
brown (7-polar set)
9.
Only for 13-polar set. Disconnect 8-input joint from right standing lights and remove contact located on grey/white
cable (fog lights) using a suitable tool. Open secondary protection of joint, unlock and remove cap on grey/white
cable.
a) Install end located on grey/white cable and secure it in supplied 1-input casing,
b) Connect joint fastened in such a way to suitable joint of connection bunch (grey cable),
c) Put remaining contact on grey/white cable of connection bunch in chamber of 8-input joint and close secondary
protection of joint. Reconnect joint to standing lights.
10.
Only for 7-polar set. Connect black/red cable in VW Passat sedan using supplied blue quick joint to cable with
brake lights function in vehicle.
11.
Only for 7-polar set. Draw remaining
function in vehicle. Cut cable with fog lights function in vehicle in an easily accessible place. Put jackets shrinking
under high temperature on ends of cables in such a way, that the end is located in the middle of the jacket's length
and then heat the jackets on the cable using either a singeing machine or a lighter.
a) Clip quick joints on both cable ends,
b) Connect quick joint clipped on cable running from fog lights switch to
c) Connect quick joint clipped on cable running to fog lights to
Trailer power supply:
12.
Only for 13-polar version. 3-input housing (red/blue, yellow
ded socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order
the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
R (right indicator)
58R (right standing light)
31(earth)
cable in chamber of 8-input joint and close secondary protection of joint.
BL (left indicator)
B (brake light)
58L (left standing light)
31(earth)
Note !!
and
cables of connection bunch to cable with fog lights
brown and white/brown leads) is provided for expan-
part no. 014-169
part no. 015-069
cable of connection bunch,
able from connection bunch.
Publicidad
