Publicidad
Idiomas disponibles
Idiomas disponibles
Fit the foot rails Cont...
E
(
)
Secure the Foot Rails to the vehicle using the M8 x 40 Hex Bolts, M8 Spring Washer and M8 x 19 Flat
Washers (Items 2, 3, 4). Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.
FIT THE RACK
3
Note: If your Slimline II Tray is not already assembled, assemble it as per the Slimline II Tray Universal
Assembly Instruction (Document RRSTUNI). Read Step 3A before fitting the Wind Deflector
A
(
)
Before fitting the Wind Deflector, and with
the Rack in the upside down position,
(Check with product sticker. It should be
upside down), slide a M8 x 20 Hex Bolt (Item
5) into each end of the First Slat using the
machined slot as shown.
REV_A01
4
Publicidad
