Publicidad
Idiomas disponibles
Idiomas disponibles
The Foot Rail Mounting Kit (FATL001) that you have received is suitable for mounting a Half Rack (1255 x 1156
mm) or Full Rack (1255 x 1964 mm). You have chosen to mount a Half Rack and not all of the components
supplied will be used. It is suggested that all additional components be stored for use at a later stage should you
wish to upgrade to a Full Rack.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right hand side's components and fitment has been
shown.
Item # Quantity
Description
1
14
M8 NUT CAP
2
8
M8 x 40 HEX BOLT
3
8
M8 SPRING WASHER
4
14
M8 FLAT WASHER
5
6
M8 x 20 HEX BOLT
6
6
M8 NYLOC NUT
7
2
REAR FOOT RAIL - 1 LEFT, 1 RIGHT
8
4
SPACER
A
(
)
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
REV_A00
You will need:
2
13 mm Flat and Socket Wrench
12 mm Flat or Socket Wrench
10 mm Flat and Socket Wrench
4 mm Hex Key
Measuring Tape
Rag and Methylated
Spirits/denatured Alcohol
Silicone
Publicidad
