Bowers & Wilkins 707 S3 Manual Del Usuario página 6

2. Positioning
Speaker Installation
702 S3 / 703 S3 / 704 S3
702 S3, 703 S3 and 704 S3 are intended to be floor mounted
only. For proper stability, always install the provided plinth, then
ensure that the speakers stand firmly on the floor using the spike
or rubber feet supplied.
You may attach the plinth during the unpacking process, following
the illustrations above or the diagrams on the top flap of the
carton.
Warning
The plinth MUST always be used, with the rubber or spike feet
inserted into the plinth. DO NOT insert rubber or spike feet
directly into the cabinet.
Note: Rubber feet installation is nearly identical to spike feet
installation. The tommy bar and spanner are only included
and used with the 702 S3 model during spike / rubber feet
installation.
702 S3
702
703 S3 / 704 S3
703, 704
702 S3 703 S3 / 704 S3
5