Publicidad
Idiomas disponibles
Idiomas disponibles
Press and hold the
on again from standby mode.
. Connecting external playback devices
.. Selecting the playback function
Switch on the party speaker.
Press the
functions (AUX/USB/Bluetooth®).
.. Connecting a device via AUX IN
Use the AUX IN
vice (for example an MP player).
Switch off the party speaker.
Switch off your external device.
Plug the end of a . mm jack cable into the AUX IN socket on the rear of the
device.
Connect the other end of the cable to the audio output of your external device.
Switch on your external device.
Switch on the party speaker.
Press the
The audio signal from your external device will now be played back.
When signals are being transmitted via a cable, it is not possible to con-
trol all operating functions using the buttons on the party speaker. In
this case, you have to rely on the controls on your external device.
.. Inserting USB memory devices
Insert the USB memory device into the USB
Press the
The first track on the USB memory device starts to play automatically.
Observe the following instructions regarding usable USB memory devices:
•
Due to the numerous different file systems and file formats, the connected stor-
age media cannot be guaranteed to function.
•
Depending on the size of the data medium, it may take some time for the sys-
tem to be detected.
•
USB memory devices with a maximum memory capacity of up to GB are sup-
ported.
•
Supported file systems are FAT and FAT. The supported file format is MP.
•
External hard disks are not supported.
•
USB extension cables are not supported.
button for approximately seconds to switch the device
button several times to switch between the different playback
socket to establish a connection with an external playback de-
button until you see AUX on the display
button until you see USB on the display.
.
port on the rear of the device.
DE
FR
NL
ES
IT
EN
Publicidad
