Publicidad
Idiomas disponibles
Idiomas disponibles
.. Equaliser
Press the
equaliser settings (FLAT, POP, CLASSIC, JAZZ or ROCK).
The selected equaliser setting is then shown on the display.
.. Party LED light
Press the
effect L to L.
The light front lights up to the beat of the music.
Press the
button several times until LOFF is shown on the display to deacti-
vate all party light effects.
. Connecting a microphone
You can connect a microphone to the party speaker.
Microphones can be used in all operating modes.
To connect a microphone, proceed as follows:
Switch off the party speaker.
Connect the microphone to the microphone input MIC
Switch on the party speaker.
Press the
Now select the desired microphone volume by turning the controller
.. Echo
You can use an echo effect variably.
Connect a microphone, as described in the previous section.
Press the
Now select the desired echo effect by turning the controller
.. Voice changer
You can select multiple voice changer effects.
Connect a microphone, as described in the previous section.
Press the
Now select the desired voice changer effect (H – H) by turning the controller
.
button once or several times to activate one of the preset
button once or several times to activate preset party LED light
button repeatedly until CU appears on the display.
button repeatedly until EC appears on the display.
button repeatedly until OFF appears on the display.
.
.
.
Publicidad
