HT SOLAR03 Manual De Instrucciones página 29


SOLAR03
HT ITALIA
S/N: 23123458
HW: 1.00 – FW: 1.02
Calibration Date:
22/03/2023
22/03/23 – 15:35
Irr. F Irr. BH Irr. BL
[Off] [Off] [Off]
Key MENU/ESC
Press key MENU to access the instrument's general menu. Press key
ESC to exit and go back to the initial screen
Key SAVE/ENTER
Press key SAVE to save a setting within the instrument. Press key
ENTER to confirm the selection of the parameters within the
programming menu
Arrow keys
Keys used within the programming menu to select the values of the
parameters
3. SWITCHING ON/OFF THE INSTRUMENT
1. Press and hold the key
instrument.
2. The screen to the side indicating the model, manufacturer, serial
number, internal firmware (FW) and hardware (HW) version,and the
date of the last calibration is shown by the unit for a few seconds
3. The screen to the side, which indicates that no probe is connected
(indication "Off") to inputs INP1... INP4 is shown on the display.
The meaning of the symbols is the following:
➢ Irr. F  Irradiance of the module's front (monofacial)
➢ Irr. B H
Tmp/A
back
[Off]
➢ Irr. B
L
back
➢ Tmp/A  Cell temperature / tilt angle of the module with regard
to the horizontal plane (tilt angle)
 Symbol of active Bluetooth connection (steady on the
➢
display) or searching for a connection (flashing on the display)
4. Press and hold the
for approx. 3s to switch on/off the
 Irradiance of the top part of the (Bifacial) module's
 Irradiance of the bottom part of the (Bifacial) module's
key for a few seconds to switch off the unit
31
SOLAR03