Publicidad
Idiomas disponibles
Idiomas disponibles
Regular maintenance and cleaning
The machine can be inspected by removing the side
panels on the left and right. It is therefore necessary to
ensure access from both sides so as to be able to reach
all parts of the unit, such as the fan, compressor and
the electronics box. In addition, access must be enabled
on the intake side of the unit for installation and removal
of the filter.
Before carrying out any maintenance work on the unit,
it must be de-energised.
For normal, regular cleaning and maintenance of the
dehumidifier, integration of at least two inspection
flaps in the ceiling soffit is therefore recommended as
shown in the illustration. This allows the filter on the
intake side to be installed and removed and the
hydraulic connections, the condensation drain, the
water circuit vent valve and the electronic unit with
display to be accessed.
2
Two inspection flaps in the ceiling soffit
1
Removable ceiling section
2
1863
600
1
Dismantling the unit
It may be necessary to dismantle the unit if, for
example, irreversible damage has occurred on site.
To avoid costs in this case, a removable ceiling section
around the dehumidifier is recommended.
This means an area of the ceiling soffit that can be
removed with little effort without damaging the ceiling
structure. The minimum distances and possible
dimensioning of this removable ceiling area are
described in the figure.
Functional testing of the unit is strongly recommended
before closing the soffit.
650
50
1
200
912
11
EN
Publicidad
