Publicidad
Idiomas disponibles
Idiomas disponibles
No. in
the
Button name
picture
1
POWER
OZONE /
2
OZONE˄ or
OZONE ˅
3
TIMER
4
INTERVAL
On the display:
No. in
the
Name
picture
5
Work area
6
Working time
Percentage of
7
ozone
production
An indicator
light to remind
8
you to clean
the ceramic
A light
reminding you
9
to replace the
ceramic plates
STARTING THE WORK
ATTENTION: before starting the device, make sure that there are no people,
animals and plants in the ozonated room.
IMPORTANT: before putting the unit into operation, seal the ozonated room well
to prevent ozone from entering adjacent rooms during operation.
Turning the device on/off (when turned on, the
device works with the default settings: time to start
ozone production: 1 minute; when turned off, the
fans run with a 1-minute delay).
Choosing one of the four levels of ozonation
efficiency per hour: 25% (10g), 50% (20g), 75% (30g),
100% (40g).
Setting the working time between 15 minutes (MIN)
- 240 minutes (MAX). Each press of the button
increases the operating time by 15 minutes.
Selecting the work cycle to launch at equal intervals,
every 12 or 24 hours (the selected work cycle is
displayed on the screen - see number 10 in the
picture above).
Setting the area of the room for ozonation: 75-
1200 m
15-240 min.
25% (10g/h), 50% (20g/h), 75% (30g/h), 100%
(40g/h).
Clean the ceramic plates when the message
"CLEAN OZONE PLATE" appears on the display.
After cleaning, delete the message with the
"OZONE" button.
plates
Replace the ceramic plates when the message
"REPLACE OZONE PLATE" appears on the display.
After cleaning, delete the message with the
"OZONE" button.
Function
Function
.
2
Publicidad
