Steren AMP-009 Manual De Instrucciones página 31

1. Insert a SD or USB memory (USB only for AMP-009BT) with at least one a MP3 audio
file.
2. Connect and turn on the microphone.
3. Turn on the amplifier.
4. Press once RECO in the remote control to start the recording. In the screen appears
the message rEC. Press again the same button to stop the recording, (this will playing
immediately).
If you want to play the record later, play PLAYRECO in the remote control.
Replacement of the battery in the remote control
Insert a CR2025 battery with the polarity as shown below.
RECORDING
31