GYS AT-160 Manual página 7

ELECTRIC SAFETY
An electric shock can be a source of a direct or indirect, or even fatal, serious accident.
Never touch the live parts of the torch as it is connected to the cutting circuit.
Do not touch the torch and the ground clamp at the same time.
Always use dry, well-maintained clothing to isolate yourself from the cutting circuit. Wear insulating shoes, no matter where you work.
PRECAUTION FOR USE
Never wrap the cutting leads around your body.
Do not use the cables or torch to move the machine.
The torch must be fully uncoiled to prevent overheating.
Switch off the generator after the torch is cooled and before each maintenance and before replacing or control wearing parts.
Regularly check the condition of the torch. If damaged, the torch must be replaced.
GENERAL DESCRIPTION
SPECIFICATIONS
AT-160 torches are designed for automated PLASMA cutting.
TECHNICAL SPECIFICATIONS
Compatible with cutting machines
Designation
Part number
Length
Starting voltage
Max allocated current
Duty cycle at 40°C
Type de gas
Torch cooling
Operating pressure
Input pressure range
Range of ambient temperature in cutting
Range of ambient temperature in transport or storage
Applied standard
CURRENT
45 A
65 A
85 A
105-125 A
SET UP
TORCH CONNECTION REQUIREMENT
The cutting machine must be switched off.
CUTTING
Torch 6 m
5.0 bar – 275 l/min (72.5 PSI - 72.6 gpm)
5.0 bar – 285 l/min (72.5 PSI - 75.3 gpm)
5.0 bar – 300 l/min (72.5 PSI - 79.3 gpm)
5.0 bar – 355 l/min (72.5 PSI - 93.8 gpm)
AT-160
AT-160
6 m
067479
6 m (19 ft)
100%
Torch 12 m
5.3 bar – 275 l/min
5.4 bar – 285 l/min
5.6 bar – 300 l/min
6.0 bar – 355 l/min
Insert the torch connector (A) in the female connector (E) and screw the
part B. Make sure the torch is tight enough.
To remove the torch, proceed in reverse order.
NEOCUT 125
AT-160 AT-160
12 m 15 m
067486 069800
12 m (39 ft) 15 m (49 ft)
500 V max
160 A
125 A
air
air
5.5 bar (80 PSI)
6 -> 9 bar (87 -> 130 PSI)
-10 -> +40°C (14 -> 104 °F)
-10 -> +55°C (14 -> 131 °F)
EN60974-7
(77 PSI - 72.6 gpm)
(78 PSI - 72.6 gpm)
(81 PSI - 72.6 gpm)
(87 PSI - 72.6 gpm)
EN
AT-160
20 m
069817
20 m (65 ft)
7