GYS AT-160 Manual página 8

TORCHES EQUIPMENT
The torch must be fitted with the appropriate consumables, selected based on the application and selected current.
Using the wrong consumables will result in poor cutting, excessive use of consumables and possibly prevent the machine from working.
067592 (x1)
067578 (x1)
De ector
Protective
067608 (x1)
067585 (x1)
De ector
Protective
COMMON DEFECTS ROOT CAUSE
Consumables
Nozzle
Gas
8
PRECISION CUT
067516 (x5)
45A
067523 (x5)
45A
067530 (x5)
65A
ohmic
shroud
067547 (x5)
85A
Tailpipe
067554 (x5)
105-125A
067561 (x5)
160A
ohmic
Tailpipe
shroud
Consumables are wear parts, it s important to know when to replace them.
Visually: welded or damaged consumables, tip hole larger than 1.5mm, weared electrode, welded pads...
Consequencies: loss of cutting performance, arc striking difficulties...
The nozzle shall be properly tightened so that all parts are correctly fixed. The nozzle shall not be easily turned.
Use compressed air with oil and water filtration.
AT-160
067509 (x1)
Di user
067493 (x5)
Electrode
067479 - 6 m
067486 - 12 m
EN