Switching off and storing the appliance
1
Remove the plug from the wall socket.
2
Allow the appliance to cool down completely.
3
Clean the appliance and all the accessories (see 'Cleaning
and maintenance') and dry them thoroughly.
4
Wind the power cord around the lugs on the base of the
appliance. See Figure 1.
Cleaning and maintenance
• Never move the appliance when it is switched on or is
still hot. Switch off the appliance and wait until it has
cooled down before moving it.
• Never use corrosive or scouring cleaning agents.
• Make sure that the plug has been removed from the wall
socket before cleaning the appliance.
• Never immerse the appliance in water.
• Ensure that no moisture gets into the electrical parts of
the appliance.
1
Remove the plug from the wall socket and let the appliance
cool down completely.
2
We recommend that you clean the spatulas and grill plate
with hot water and washing-up liquid.
3
Clean the heating base with a damp cloth and dry it
thoroughly.
'
LET
S COOK TABLE CHEF TM ART
General information
• Please read these instructions carefully and retain them
for future reference.
• Use this appliance solely in accordance with these
instructions.
• Use this appliance only for domestic purposes.
• The use of this appliance by children or persons with a
physical, sensory, mental or motor disability or with a
lack of the necessary knowledge and experience can give
cause to hazards. Persons responsible for the safety of
these people should give explicit instructions or
supervise the use of the appliance.
• Make sure that children do not play with the appliance.
• Have repairs carried out by a qualified service technician.
Never try to repair the appliance yourself.
Heat and electricity
• Verify that the mains voltage is the same as that indicated
on the type plate on the appliance before use.
• Plug the appliance into an earthed wall socket.
• Always remove the plug from the wall socket when the
appliance is not in use.
• Always remove the plug from the wall socket by pulling
the plug, not the power cord.
• Do not use the appliance if the power cord or the
appliance is damaged. For your safety, return the
appliance to our service department. A damaged power
cord can be replaced solely by our service department,
who has the special tools required for the repair.
• Make sure that the appliance and the power cord do not
come in contact with sources of heat, such as a hot hob
or a naked flame.
• Make sure that the appliance, the power cord and plug do
not come into contact with water.
162243
Safety
5