Descargar Imprimir esta página

Saeco Xelsis SUPREMA SM8885 Manual Del Usuario página 11

Ocultar thumbs Ver también para Xelsis SUPREMA SM8885:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Item
Machine front
Descaling of the
machine
What to do if the descaling procedure is interrupted
You can exit the descaling procedure by pressing the on/off icon on the control panel. If the descaling
procedure is interrupted before it is completely finished, some descaling liquid may remain in the
water tank or the water circuit. In that case, do the following:
1 Empty and rinse the water tank thoroughly.
2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine
back on. The machine will heat up and perform an automatic rinsing cycle.
3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual rinsing cycle, first
dispense half a water tank of hot water and then brew 2 cups of pre-ground coffee without adding
ground coffee.
Note: If the descaling procedure was not completed, the machine will require another descaling
procedure as soon as possible.
Troubleshooting
To help you solve the most common problems that you could encounter when using the machine,
Saeco offers support in multiple ways:
- you can find step-by-step videos on the control panel of the machine
- support videos and a complete list of frequently asked questions are available on
www.saeco.com/care
- on www.saeco.com/care, you can also find the extended version of the user manual
If you are unable to solve the problem, contact the Consumer Care Center in your country. The contact
details can be found on the warranty leaflet and on the control panel of your machine.
Technical specifications
The manufacturer reserves the right to improve the technical specifications of the product. All the
preset quantities are approximate.
Description
Size (w x h x d)
Weight
Power cord length
Water tank
Bean hopper capacity
When to clean
Weekly
When the machine asks you to
descale
How to find in the control panel/
What to do
Clean with a non-abrasive cloth.
STATUS -> DESCALING. Follow the steps to
descale the machine. When descaling is
needed, the machine asks you to descale it,
press the OK icon to start and follow the
steps.
Value
287 x 396 x 487 mm
11 - 12.4 kg
1200 mm
1.7 liters, removable
450 g
11
English

Publicidad

loading