Publicidad
Idiomas disponibles
Idiomas disponibles
lmportant information without plug
The appliance is designed to be permanently installed with a three-pin
power cord and may only be connected by a licensed expert in
accordance with the connection diagram.
Only a qualified electrician who takes the relevant regulations into
account may replace the power cord. Do not use multiple plugs, power
strips or extensions. Overloading causes a risk of lire.
Il the connection is no longer accessible following installation, an all-pin
isolating switch with a contact gap of at least 3 mm must be provided.
Connect the wires of the mains power cord in accordance with the following
colour coding:
Green and yellow
Blue
Brown
Great Britain and Australia:
Do not connect the appliance using a 13 A plug or protect it with a 13 A
fuse. The appliance must be protected using a fuse that is rated 16 A
or higher. The appliance must be disconnected from the power supply
during all installation work. When the appliance is installed, protection
must be provided against accidental contact in the future.
Earth wire < (E)
Neutral wire (N)
Live (L)
EN 24
Publicidad
