Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
Line will not advance
Grass wraps around boom
housing and string head
POSSIBLE CAUSE
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Cutting tall grass at ground level.
9 – English
SOLUTION
Lubricate with silicone spray.
I n s t a l l m o r e l i n e . R e f e r t o L i n e
Replacement earlier in this manual.
Pull lines while alternately pressing down
on and releasing bump knob.
Remove line from spool and rewind.
Refer to Line Replacement earlier in
this manual.
Cut tall grass from the top down to
prevent wrapping.
Publicidad
