Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing the Remote Control
Power
Button
NOTE: Connect the charger if pairing a new remote control.
NOTE: If the remote control was previously paired to the faucet, it will connect
automatically. If not paired, the LEDs will pulse blue.
Direct the faucet into a sink or a bucket.
Press the power button to turn ON the remote control. All LEDs will turn white
for 2 seconds.
Plug the faucet power supply into a 120 VAC, 15 Amp, GFCI/RCD protected
electrical outlet.
The KOHLER LED will be steady blue when the remote control discovers the
faucet.
Press the KOHLER icon. The faucet will turn ON for a few seconds. The KOHLER
icon will turn green and the large droplet icon will turn red.
Finish pairing: Press the KOHLER icon.
Cancel pairing: Press the large droplet icon.
NOTE: If this is a new faucet installation, refer to the "Remote Control Start-Up
Procedure" section to complete the installation.
Kohler Co.
Large
Droplet
Icon
KOHLER Icon
3
LEDs
1463170-5-A
Faucet
Power
Supply
Publicidad
