Kohler K-29179-2MB Guia Del Usuario página 4

Remote Control Start-Up Procedure
IMPORTANT! Perform this procedure after installing the faucet or when system
conditions change such as replacing the electronic valve.
NOTE: The remote control must be paired to the faucet before performing this
procedure. Refer to the "Pairing the Remote Control" section.
Direct the faucet over the sink or bucket.
Press the power button to turn ON the remote control.
Press and hold the KOHLER icon for 5 seconds. All three LEDs will turn white.
Faucet will begin the start-up procedure and turn ON the water. This may take 1
minute to complete.
The LEDs will turn OFF when the start-up procedure has finished.
1463170-5-A
Power Button
KOHLER Icon
LEDs
Faucet
Power
Supply
4 Kohler Co.