Bartscher 7/SN Uso Y Mantenimiento página 13

Kneader description
The spiral kneader is a machine meant for professional use by bread bakers and pizzerias.
The different versions of the machine (7-12-18-25-38-50 Kg. of kneaded product) cater for a vast range of
production needs, allowing various types of dough to be obtained (suitable above all for soft dough for pizza
and bread).
The machine structure has a scratch-proof painted finish which makes for it easy to clean.
It has safety features compliant with the applicable European Directives.
There are 3 kneader models:
Mod."SN – FN – CNS":
7/SN (7 Kg. mix capacity)
12/SN – 12/FN – 12/CNS (12 Kg. mix capacity)
18/SN – 18/FN – 18/CNS (18 Kg. mix capacity)
25/SN – 25/FN – 25/CNS (25 Kg. mix capacity)
38/SN – 38/FN – 38/CNS (38 Kg. mix capacity)
50/SN – 50/FN – 50/CNS (50 Kg. mix capacity)
The bowl is removable to allow it to be washed in hot running water or a dishawater.
Specifications
Description
Electric power input
Power
Dough per batch
Net weight
Packaged weight
Description
Electric power input
Power
Dough per batch
Net weight
Packaged weight
Noise
Installation
Instructions –"Digital control" (optional)
Make sure the plug is inserted correctly in the power outlet and press the "START/STOP" key. The machine
will turn on and is ready to use (the LED next to the key will come on).
To start the machine in "timer" mode, press the key with the clock symbol twice in succession (the LED next
to it will come on) and set the desired mixing time using the +/- keys.
After setting the desired mixing time (shown on the display) and making sure that the pot's lid has been
lowered down, press the "START/STOP" key to start the machine. The display will show the countdown of
the time set earlier.
If you want to stop the machine to add some ingredients or for any other
reason, before lifting the pot's lid, put the machine in standby by
pressing the "START/STOP" key again. This will also stop the timer,
which will resume together with the machine only by first lowering the lid
and then pressing the "START/STOP" button again.
Before lifting the pot's lid, put the machine in standby, otherwise the
timer will continue the countdown even if the machine is in standby.
When the time is over, the machine will stop.
If you want to work without the timer, press the key with the "hand" symbol (manual) twice. The LED next to it
will come on (it excludes the timer) and by pressing the "START/STOP" key the machine will start in manual
mode.
Once the cycle has ended, press the "START/STOP" key and the machine will stop.
To turn off the display completely, press the "START/STOP" key and hold it for about 3 seconds.
Unit of measure 7/SN
V Hz Ph
kW (HP) 0.37(0.5)
kg 7
kg 39
kg 46
Unità di misura 12/CNS-FN 18/CNS-FN 25/CNS-FN 38/CNS-FN 50/CNS-FN
V Hz Ph
kW (HP) 0.75 (1)
kg 12
kg 65
kg 72
INFORMATION
Lever
Lid
Control panel
Pan
Pot flange
Base
12/SN 18/SN 25/SN
230V 50Hz 1Ph
230/400V 50Hz 3Ph
0.75 (1) 0.75 (1) 1.5 (2)
12 18
58 59
65 66
230V 50Hz 1Ph
230/400V 50Hz 3Ph
0.75 (1) 1.5 (2)
18 25
66 103
73 112
< 70 dB(A)
On the floor
5
GENERAL
38/SN 50/SN
230/400V
50Hz
1.5 (2) 2.2 (3)
25 38
93 105
100 112
230/400V
50Hz
1.5 (2) 2.2 (3)
38
115
127
1
3Ph
50
175
195
3Ph
50
206
230