Taurus CG4HN/B Manual Del Usuario página 23


Do not dismantle the tap shafe: in the event of malfunction, change the whole tap.

Before placing the burners back on the top place, make sure that the injector is not blocked.

A full operational test and a test for possible leakages must be carried out after gas
conversion (such as soap water or gas detector).

After completing conversion, a qualified technician or installer has to mark "V" on the right
gas category to match with the setting in rating plate. Remove the previous "V" mark.
DESCRIPTION
Top Plate Dimension
(WxDxH)
Glass 600x515x90mm
Accessories
1 Bracket (4)
2 Sponge (4)
3 Screw (4)
4 Injector (4)
5 Gas-pipe bend (1)
6 Instructions manual (1)
If the model of your appliance does not have the accessories described above, they can also be
bought separately from the Technical Assistance Service.
INSTRUCTIONS FOR USE

The following symbols will appear ion the control panel, next to
each control handle:
Control handle
Tap
Sealing ring
Ignition
device
Continuous
Ignition
Type
Gas Electricity
connection Supply
G 1/2 220-240
thread Vac
50-60 Hz
2W
Adjustment screw
Burner
Feature
Wok
burner (1)
Semi-
rapid (2)
Auxiliary
(1)
ƩQn
7,8 kW