Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not exceed the maximum filling volume as indicated on the appliance, as there is risk
of water tank water overflow from the back hole.
• Never operate appliance with open lid.
This appliance is intended to be used in household and similar applications
such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
– Not suitable for contact with high acidic and/or high salty food
The surface with symbol
GETTING STARTED (PICTURE PAGE 3)
1
Place the machine on a flat surface. When starting the machine for the first time, fill the tank with cold
water. Start the machine with the ON/OFF switch. Let a full tank of water pass through the machine once
or twice to clean it, without using paper filter or coffee.
2
Making coffee: open the lid and fill the water tank with fresh cold water up to the desired level. There is a
water level indicator on the water tank and on the coffee jug.
3
Insert a size 1x4 paper filter in the filter holder and fill it with ground coffee. For average strong coffee
6-7 g coffee powder per cup is sufficient. Close the water tank lid and place the jug back (complete with
lid).
4
Start the machine with the ON/OFF switch. The ON/OFF indicator light will come on and hot water will
flow into the filter. If the machine is not turned off manually, the Safety Auto-Off function turns it off after
40 minutes.
5
The brewing process can be interrupted by pressing the ON/OFF switch at any time. The turned off ON/
OFF indicator light means that your coffee maker is shut off. Press the ON/OFF switch again, the appli-
ance will start the complete brewing cycle all over again
6
If the jug is removed, the filter valve prevents coffee from dripping onto the warming plate. (While
preparing coffee, the jug must not be removed for longer than 30 seconds or the filter will overflow.)
7
The machine is compatible with Electrolux PureAdvantage
filter, it's recommended to change filter after 60 brew cycles. Before using the new filter, place the new
filter into a container of clean cool water, and let soak for 10 minutes. Then rinse the filter for 10 to 15
seconds under the running tap water.
CLEANING AND CARE
8
Turn the machine off and unplug the power cord. Wipe all outer surfaces with a damp cloth. Coffee jug
and jug lid are dishwasher proof. Never use caustic or abrasive cleaners, and never immerse the machine
in liquid!
9
To clean the filter holder, lift it up by the handgrip and remove the filter holder. To clean the filter valve
thoroughly, push it several times while it is being rinsed. The filter holder can also be washed in the
dishwasher.
6
:
Caution, hot surface are liable to get hot during use.
water filter. If you choose to use the water
TM
www.aeg.com
Publicidad
