HAIRCUT TH34 Manual De Usuario página 24

3.2 Charging the battery on the charging base
Figure 3: Charging the clipper
battery on the charging base.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, E).
2. Insert the power pack connector
(Figure 3, D) in the socket (Figure 3, C)
on the charging base.
3. Insert the power pack (Figure 1, N) in
the mains power socket.
4. Put the clippers (Figure 3, A) on the
base (Figure 3, B).
5. During the charging cycle, the LCD
unit shows the remaining autonomy
(Figure 1, J). The symbols (Figure 1, L
and M) are lit up; the symbol (Figure
1, L) is animated.
6. The charging cycle is switched off
automatically. The autonomy of 120
minutes is displayed (Figure 1, J).
7. Unplug the power pack; the clippers
can be used.
24