HAIRCUT TH34 Manual De Usuario página 23

3 Charging the battery
It is essential to charge the clipper battery for about 3 hours before
using the clippers for the first time. Charge the clippers at least once
during the year following the date of delivery.
The ideal temperature range for use of the charger is between 5°C and 40°C.
The charging time is about 2 hours. The battery reaches its full capacity after
3 or 4 charging cycles.
3.1 Charging the battery from the mains power supply
Figure 2: Charging the clipper
battery directly from the mains
power supply.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, E).
2. Insert the power pack connector
(Figure 2, B) in the socket (Figure 2, A)
on the clippers.
3. Insert the power pack (Figure 1, N) in
the mains power socket.
4. During the charging cycle, the LCD
unit shows the remaining autonomy
(Figure 1, J). The symbols (Figure 1, L
and M) are lit up; the symbol (Figure
1, L) is animated.
5. The charging cycle is switched off
automatically. The autonomy of 120
minutes is displayed (Figure 1, J).
6. Unplug the power pack; the clippers
can be used without the lead.
23