Publicidad
Idiomas disponibles
Idiomas disponibles
Anleitung_SE_1000_digital_SPK7:_
GB
supplied spark plug wrench.
Clean the spark plug with a copper wire brush or
fit a new one.
Assemble in reverse order.
7.6 Storage
1. Empty the petrol tank using a petrol suction
pump.
Important! Do not empty the petrol tank in
enclosed areas, near fire or when smoking. Petrol
fumes can cause explosions and fire.
2. Start the engine and run it until the tank and fuel
line are completely empty and the engine stalls.
3. Let the unit cool down.
4. Remove the spark plug and pour approx. 20 ml of
engine oil into the cylinder.
5. Pull the starter handle slowly several times to
coat the internal parts.
6. Screw the spark plug back in.
7. Store the unit in a well-ventilated, safe place.
7.7 Transport
1. Wait until the unit has cooled down.
2. Move the ventilation switch on the tank cover to
the "OFF" position (Fig. 4/Item. B).
Important! Always transport the unit in the upright
position (even when the tank breather hole is closed).
7.8 Ordering replacement parts:
Please provide the following information on all orders
for spare parts;
Model/type of the equipment
Article number of the equipment
ID number of the equipment
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council!
16
05.05.2011
10:21 Uhr
Seite 16
Publicidad
