Descargar Imprimir esta página

Aiwa NSX-A909 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

DISC CHANGE
1
';%:;,,!,$!!
DISC DIRECT PLAYI 1-3
II
11
11
1
I
Bl
1
—':.4
LOADING DISCS
Press CD, then press 4 OPEN/CLOSE
to open the
disc compartment.
Load disc(s) with the label side
up.
To dav one or two discs,
place the discs on tray 1 and 2.
To Wav three discs,
press
DISC CHANGE
to rotate the trays
after placing
two discs.
Place the third disc on tray 3.
Close the disc compatlment
by pressing
A OPEN/CLOSE.
Tray 1
CHANGE
Tray number
of the
disc to be played
Total playing
time
Total number
of tracks
Load discs,
To olav all discs in the disc com~artment,
press +-.
Play begins with the disc on tray 1.
Number
of track being played
Elapsed
playing
time
To
Dlav one disc only.
press DISC DIRECT PLAY 1-3.
The selected
disc is played
once.
To play with the remote control
Press DISC DIRECT
PLAY,
then press numbered
buttons
1-3
within 3 seconds
to select a disc.
To
stop play,
press W.
To
pause play,
press II. To resume
play, press again.
To
search for a particular point during playback,
keep +
or -
pressed
and release
it at the desired
point.
To
skip to the beginning of a track during playback,
press
-
or *
repeatedly
or turn MULTI JOG.
To
remove discs,
press 4 OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When
4 OPEN/CLOSE
is pressed,
the power is also turned on
and the disc compartment
is opened.
To
check the remaining time
During
play,
press
CD EDIT/CHECK.
The
amount
of time
remaining
until all tracks finish playing
is displayed.
To restore
the playing
time display,
repeat the above.
Selecting a track with the remote control
1
2
Press
DISC
DIRECT
PLAY,
then
press
numbered
buttons
1-3 within 3 seconds
to select a disc,
Press numbered
buttons
O-9 and +1 O to select a track.
Example:
To select the 25th track, press +1 O, +1 O and 5.
To select the 10th track, press +10 and O.
The selected
track starts to play and continues
to the end of
that disc.
Replacing
discs during play
While one disc is playing, the other discs can be replaced
without
interrupting
play.
1
Press DISC CHANGE.
2
Remove
the discs and replace
with other discs.
3
Press 4 OPEN/CLOSE
to close the disc compartment.
m c
When loading
an 8-cm (3-inch)
disc, put it onto the inner circle
of the tray.
Do not place more than one compact
disc on one disc tray.
Do not"tilt
the unit with discs
loaded.
Doing
malfunctions.
Do not use irregular
shape
CDs
(example:
octagonal
ones).
It may result in malfunctions.
so may cause
heart-shaped,
15
ENGLISH

Publicidad

loading