Mondolfo Ferro As933 Manual De Uso página 32

SUPER RM power unit .............................................................. 8-11100180
Presser roller arm ................................................................ 8-11100181
MOB bead-rim presser arm ....................................................... 8-11100238
Disk holder arm .................................................................... 8-11100183
RM arm .............................................................................. 8-11100184
Pax Kit on RH HELP ................................................................ 8-11100182
PNEULIFT 60 wheel lift ........................................... 8-11100292 - 8-11100353
Set of four 4" adapters ........................................................... 8-11100041
Set of four 8" adapters ........................................................... 8-11100042
Set of four motorbike adapters .................................................. 8-11100036
SPECIFIED CONDITIONS
OF USE
The AS 933, AS 934, AS 943, AS 944 and AS
946 tyre changers are designed exclusi-
vely for mounting and demounting tyres,
using the tools with which the machines
are equipped in accordance with the
instructions in this manual.
WARNING
Any other operations carried out on the
machine are considered improper use
and shall be construed as negligence.
The machine is equipped with an inflation
system that is independent from the sy-
stems described above. Extreme caution
must be exercised during the use of the
machine inflation system (read INFLATION
heading).
WARNING
When working with the machine it is
strongly recommended to avoid using
equipment or tools not manufactured
by MONDOLFO FERRO.
Figure 7 shows the positions assumed by
the operator during the various stages of
work with the machine.
A Bead breaker
B Tyre demounting and mounting
C Inflation area.
32
OPTIONAL ACCESSORIES
E - Operator manual
nglIsh
WARNING
The tower tilting operation must be
carried out from work position B (fig.7),
keeping your hands well away from all
moving parts of the machine.
WARNING
To stop the machine in an emergency:
- unplug from the electrical supply;
- isolate the air supply network by discon-
necting the shut-off valve (rapid insert)
(fig.7a).
As 933 - As 934 - As 943 - As 944 - As 946