Tristar ST-8227 Manual De Usuario página 4

Instruction manual
• The use of accessories that are not recommended by the manufacturer
can cause injuries and will invalidate any warranty that you may have.
• Allow the appliance to cool down before you clean or store it.
• Unplug the appliance from the socket when changing the spare parts
or for maintenance.
• To protect yourself against an electric shock, do not immerse the cord,
plug or appliance in the water or any other liquid.
• Do not use this appliance with a damaged cord or plug or when the
appliance has malfunctions, or has been damaged in any manner.
To avoid a hazard make sure that a damaged cord or plug will be
replaced by an Competent qualified repair service(*). Do not repair this
appliance yourself.
• Unplug the appliance from the socket when you are not using it.
• Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
• Allow the device to cool down before you are going to remove or
replace spare parts.
• Do not use this appliance near direct heat sources.
• Make sure the cord does not touch the hot parts of the appliance.
• Do not use this appliance in the bathroom or near a sink filled with water.
If this appliance has fallen into the water do not under no circumstances
directly grab this appliance, but first pull the plug from the socket.
• Children should be supervised to ensure that they do not play with the
appliance.
• Keep the appliance and its cord out of reach of children less than 8 years.
• CAUTION: hot surface
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
4
should return the appliance to this repair service.
All manuals and user guides at all-guides.com
PartS deScriPtion
1. Temperature knob
2. Water tank cover
3. Steam rate control button
4. Spray head
5. Spray button
6. Burst of steam button
7. Soleplate
8. Self-clean button
9. Indicator light
Before the firSt uSe
• Carefully read all instructions before using the iron.
• Clean the soleplate with a soft damp cloth before the iron will be used
• Pull out the water tank cover and slowly fill the water tank with clean
• Smell or smoke may disperse at the beginning as caused by the
• NOTE: Some particles may come out of the soleplate when you use the
(for decreasing steam)
5
3
2
8
4
for the first time.
cold water using the measuring cup.
warming up of the insulation material.
iron for the first time. This is normal; the particles are harmless and stop
coming out of the iron after a short while.
6
9
1
7