PNI JOPIX AN-2 Manual De Instrucciones página 31

5.4.- [F1] – [F6] KEYS:
This transceiver has 6 self-defined keys; each key can set 3 functions.
[F1] ~ [F3] has the 3 functions on the left side of the LCD, [P4] ~ [P6] has the functions on
the right side of the LCD.
5.5.- AM/FM MODE:
1. Press [FUNC] key to choose programmed function group.
2. Press the programmable key which allocated as MOD function, the LCD displays
MOD: XX.
3. Press the key again or turn the channel selector knob to select between FM
4. Press channel selector knob or [FUNC] key to store setting and exit.
5.6.- RF GAIN SETTING (RFG):
1. Press [FUNC] key to choose programmed function group.
2. Press the programmed key witch allocated as RFG function, LCD displays RFG:
XX.
3. Press the key again or turn the channel selector knob to adjust RF gain level.
4. Press the channel selector knob or the [FUNC] key to store setting and exit.
Note:
- When RFG function is ON, LCD will display the level accordingly.
5.7.- 9/19 CHANNEL (EMG):
1. Press [FUNC] key to choose programmed function group.
2. Press the programmable key which allocated as EMG function, first press is choose
CH 9.
3. Press it again, will choose CH 19.
4. Press it third time, will return to last normal operating channel.
5.8.- VOLUME CONTROL:
1. Press [FUNC] key to choose programmed function group.
2. Press the programmable key witch allocated as VOL function, LCD display VOL:
XX.
3. Turn the channel selector knob to adjust volume level.
English - 7 -
AM.