Publicidad
Idiomas disponibles
Idiomas disponibles
5.12.- MEMORY CHANNEL (MEM):
Short press: Use memory channel.
1. Press [FUNC] key to choose programmed function group.
2. Press the programmable key which allocated as MEM function to enter memory
channel, turn channel selector knob to choose memory channels.
3. Press it again to store setting and exit.
Long press: Memory channel store position.
1. Choose a channel.
2. Press [FUNC] key to choose programmed function group.
3. Press and hold the programmable key which allocated as MEM function, the LCD
displays memory channel number, turn channel selector knob to choose channel
number (CH-01 ~ CH-08). Press and hold [FUNC] key until LCD displays the stored
channel.
Notes:
- When the channel number is not flash, means the channel already stored into
memory channel.
- When the channel number is flash, means the channel is not into memory
channel.
5.13.- DUAL-WATCH (DW):
1. Choose first dual-watch channel, and select AM or FM mode.
2. Press [FUNC] key to choose programmed function group.
3. Press the programmable key which allocated as DW function, LCD flashes and
displays "D".
4. Turn channel selector knob to choose second dual-watch channel, press other self-
define key to set operating mode (AM or FM).
5. Press allocated the programmable key again to turn on dual-watch function, LCD
displays "D".
6. Press channel selector knob or the [FUNC] key to exit dual-watch function.
5.14.- TRANSMIT DTMF CODE (CAL):
1. Press [FUNC] key to choose programmed function group.
2. Press the programmable key to transmit DTMF code which allocated as CAL
function.
Note:
- This function is valid only when the CALL set with valid DTMF group.
5.15.- NB/ANL FUNCTION (NB):
1. Press [FUNC] key to choose programmed function group.
2. Press the programmable key which allocated as NB/ANL function, LCD displays
NB: XX.
3. Press it again or turn channel selector knob to choose between ON ~ OFF.
English - 9 -
Publicidad
