en
►►1. INFORMATION ON
SAFETY
IMPORTANT: READ AND UNDER-
STAND THIS OPERATIONAL MANUAL
BEFORE ASSEMBLING, COMMISSION-
ING OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT USE
OF THE APPLIANCE CAN CAUSE SERI-
OUS INJURY. KEEP THIS MANUAL FOR
FURTHER REFERENCE.
IMPORTANT: This appliance is not
suitable for use by persons (including
children) with reduced physical, senso-
ry and mental capacities or with lack of
experience or knowledge unless super-
vised by a person responsible for their
safety. Children must be supervised to
make sure they do not play with the app-
liance.
►1.1. Fill the appliance tank only with
clean water.
►1.2. Switch off and disconnect the ap-
pliance from the mains before filling
it.
►1.3. Do not move the appliance, once
the tank has been filled.
►1.4. Comply with all local regulations
and current standard during appli-
ance use.
►1.5. Keep the appliance dry, in order
to avoid electric shocks. Hands must
always be dry.
►1.6. Use only in ventilated and dry ar-
eas.
►1.7. For indoor use only.
►1.8. Only power the appliance the with
voltage and frequency as specified on
the nameplate.
►1.9. Only use suitably earthed 3-wire
extension leads.
►1.10. Do not cover the appliance
with paper, cardboard, plastic, metal
sheets or any other inflammable ma-
terial during use, in order to prevent
any risk.
►1.11. The appliance must be used on a
stable and levelled surface, in order to
prevent any risk.
►1.12. Disconnect the appliance from
the mains socket when not in use.
►1.13. Do not block the air vent (rear
side) or the air outlet (front side) of
the appliance.
►1.14. The minimum safety distance
recommended between the appliance
and walls or other items is 0,5 m.
►1.15. When the appliance is connect-
ed to the mains or running, it must
never be moved, handled, topped-up
or subject to any maintenance opera-
tion.
►1.16. The appliance (power cable in-
cluded) must be kept at a suitable
safety distance from heat sources.
►1.17. In any case, the appliance must
be opened and/or repaired by author-
ised after-sales centre.
►1.18. If the power supply cable is dam-
aged, it must be replaced by a techni-
cal support centre to prevent any risk.
►1.19. After a period of inactivity, wash
the tank with clean water.
►1.20. In the event of incorrect cooler
operation, immediately disconnect
the electrical power supply and con-
tact the support centre.
►1.21. Protect the power cable from po-
tential damage caused by the move-
ment of vehicles or pedestrians. Im-
proper connection to electrical voltage
or improper installation may result in
electric shocks.
►1.22. Conditions of use:
A) Temperature of the air: 18°C - 45°C;
Temperature of the water: <45°C.
B) The air must be free of dust and
pollutants, otherwise cleaning must
be intensified.
►►2. UNPACKING
►2.1. Remove all packaging materials
used to wrap and deliver the appliance
and dispose of them in compliance with
the Standards in force.
►2.2. Extract all items from the packaging.
►2.3. Verify if damage has occurred during
transport. Immediately inform the dealer
where the appliance was purchased if
this appears damaged.