Publicidad
Idiomas disponibles
Idiomas disponibles
10) SYSTEM SETTINGS
The system settings interface features various sub-menus: press each menu to access it. In each sub-menu, change the required parameters and press the button to go back to the previous
menu.
Volume:
• Hold sound: volume of the sound emitted by the device while waiting for an answer;
• Call volume: volume of the sound emitted during a call;
• Door alarm status: enabling of the sound emitted by the Outdoor Station if, in the presence of a control contact, the door is left open;
• Lock unlock message: enabling of the sound message for when the electric lock is unlocked;
Other indications - Click on the screen: audible click when the LCD is pressed;
• Sound enhancement.
Language:
• menu to select the language used by the device;
Unlock settings:
• Facial recognition;
• Common password enabling;
• User PIN enabling;
• Change common password
Current password: current password of the device
New password: new password to be associated with the device
Re-enter new password: confirm the new password
• Twilight sensor threshold: twilight sensor settings.
Display configuration:
• Brightness: LCD screen brightness;
• Activate screensaver: time after which the screensaver is activated. If the delay entered is 0, the function will never be activated;
• LCD off: time after which the device's LCD is switched off. The time is from when the screensaver is activated.
Card management:
• User card:
User card registration:
Check card information:
Delete user card:
Delete all user cards:
Note: deleting one or more cards no longer allows the customer(s) to access the building. The deletion operation is irreversible.
• Security card:
Insert security card:
Unlock settings:
Check card information:
Delete security card:
Delete all security cards:
• Copy registered cards:
• Allow the cards to be copied:
Face registration:
• Face registration:
Name list:
• If enabled from the configuration menu, it allows for the complete management of the names associated with the apartments;
Unlock time:
• unlock time (1 – 60 sec) of the clean contact relay (Unlock 2);
Lights settings:
• future function not yet released;
11)
CONFIGURATION
The configuration interface features various sub-menus: press each menu to access it. In each sub-menu, change the required parameters and press the
menu.
System properties
• No. of digits of the call:
• Door alarm status:
• Analogue video intercom switch.
Station type:
"Building" mode:
"Villa" mode:
Facial recognition:
• Motion recognition:
• No. of faces per apartment:
• Threshold settings:
Proximity detection:
Administrator password:
Name list enabling:
• Name list:
• Display mode:
• Alignment:
• Page change mode:
Concierge enabling: if enabled, the
Help: This menu features some utilities to identify the version of the device and carry out tests or resetting.
• Version: device software version;
• System test: system test page;
• Log: function for internal use/assistance;
• Reboot: system reboot;
• Factory reset: resetting of the device to the factory parameters. Any parameters entered will be deleted.
Call enabling: Enabling of incoming calls from Indoor Stations.
by placing a blank card near the device reader, they are associated, thus creating a new "user" card and allowing it to access the building;
displays all "user" cards associated with the device;
by placing an already associated "user" card near the device reader, it is deleted from the register, preventing access to the building;
deletion of all user cards stored in the device;
by placing a blank card near the device reader, they are associated, thus creating a new "security" card and allowing to access the building;
enabling of the unlock function for the cards stored in the device;
displays all "security" cards associated with the device;
by placing an already associated "security" card near the device, it is deleted from the register, preventing access to the building;
deletion of all "security" cards stored in the device.
allows you to copy the cards associated with one 7" Outdoor Station
to another 7" Outdoor Station belonging to the same network;
enabling of the card copying function;
matches the acquired face to an apartment;
number of digits for dialling the apartment number, 3 or 4 digits (e.g. 001 or 0001);
enabling of the door opening status check. The function can be used if there is a NC sensor on the door;
choice of the type of Outdoor Station (Villa or Building): the parameter allows for an address to be associated with the Outdoor Station.
ideal for multiple facilities with multiple buildings (e.g. extended apartment complex) where it is necessary to manage several Outdoor and Indoor
Stations at different staircases.
ideal for single buildings with one or more Outdoor and Indoor Stations;
management menu for the facial recognition function.
Enabling of facial recognition when approaching the device;
number of faces that can be associated with an apartment (10, 20, 30)
In this interface, it is possible to configure the facial recognition threshold (High, Medium, Low), where each level corresponds to the accuracy of facial
matching. A higher threshold level results in higher facial recognition accuracy.
activation of the proximity recognition sensor; when a visitor approaches the device, it will automatically activate the
facial recognition sensor;
activation or modification of the administrator password of the system (the password used to access the device configuration menu).
The code must consist of 6 digits. The default password is 222222.
if enabled, the
button will be visible in the lower part of the main call interface. If clicked, this button will display the list of the
names of the residents
activation of the "Name list" on the device display;
rows displayed on each page;
top or bottom alignment of the LCD;
name list display mode - names scrolling on a single page or display on several pages;
button will be visible in the lower part of the main call interface. Click this button to call the concierge.
5
button to go back to the previous
Publicidad
