Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: You may now roll your tractor off t he
skid. Fol]owthe
appropriateinstruction
below
toremove the tractor from the skid.
_I_ WARNING;
Before
starting,
read, un-
derstand
and follow all instructions
in the
Operation
section
of this manual. Be sure
tractor
is in a well-ventilated
area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR
OFF SKID
(See
Operation
section
for location
and
function
of controls)
1. Raise attachment lift lever to itshighest
position.
2. Release parking brake by depressing
brake pedal.
Place freewheel control in disengaged
position to disengage transmission (See
_TOTRANSPORT" inthe Operation sec-
tion of this manual).
4. Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor.
Continue with the instructions that follow.
CHECK TIRE PRESSURE
The tires on your tractor were overinfIated at
the factory for shipping purposes. Correct
tire pressure is important for best cutting
performance,
• Reduce tire pressure to PS! shown on
tires.
CHECK
DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual,
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments section ofthis man-
ua]. Verify that the belts are routed correctly.
CHECK
BRAKE SYSTEM
After you learn how to operate your tractor,
check to seethatthe brake is operating prop-
erly. See"TO CHECKBRAKE" inthe Service
and Adjustments section of this manual,
,/CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance
and satisfaction
from this
Quality Product.
Please review the following checklist:
`/All assembly instructions have been com-
pleted.
`/No remaining loose parts in carton.
,/Battery
is properly
prepared
and
charged.
,/Seat is adjusted comfortably and tightened
securely.
,/All tires are properly inflated. (For snip-
ping purposes, the tires were overinflated
at the factory).
,/Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling).
,/Check
mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
,/Check
wiring.
See that all connections
are still secure and wires are properly
clamped.
,/Before driving tractor, be sure freewheel
control is in "transmission
engaged"
position (see "TO TRANSPORT
in the
Operation section of this manual).
While learning how to use yourtractor, pay ex-
tra attention to the following important items:
Z Engine oil is at proper level,
Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
v" Become familiar with all controls, their lo-
cation and function. Operate them before
you start the engine.
¢" Be sure brake system is in safe operating
condition.
,/Be sure Operator Presence System and
Reverse Operation System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).
,/It isimportantto purgethel_ansmissionbefore
operating your tractor for the first time. Fol-
low properstarting andtransmission purging
instructions (See "TO STARTENGINE"and
"PURGETRANSMISSlON"intheOperation
section of this manual).
Publicidad
