Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: You may now roll your tractor off the
skid, Followthe appropriate instruction below
to remove the tractor from the skid.
WARNING: Before starting, read, un-
derstand and follow al! instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR
OFF SKID (See
Operation
section
for location
and
function
of controls)
1. Raise attachment liftlever to itshighest
position.
2. Release parking brake by depressing
brake pedal.
3. Place freewheel control in disengaged
position to disengage transmission (See
"TO TRANSPORT" inthe Operation sec-
tion of this manual).
4. Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor,
Continue with the instructionsthat follow.
CHECK TIRE PRESSURE
The tires on your tractor were overinflated at
the factory for shipping purposes. Correct
tire pressure is important for best cutting
performance,
• Reduce tire pressure to PSI shown on
tires.
CHECK
DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
t_CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance
and satisfaction from this
Quality Product.
Please review the following checklist:
J" All assembly instructions have been
completed.
!,/" No remaining loose parts in carton.
_/Battery is properly prepared and charged.
1,/" Seat is adjusted comfortably and tight-
ened securely.
_/" All tires are properly inflated. (For ship-
ping purposes, thetires were overinflated
at the factory).
_/f Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling).
Vf Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
_f Check wiring. See that all connections
are still secure and wires are properly
clamped.
_/" Before driving tractor, be sure freewheel
control is in "transmission
engaged"
position (see "TO TRANSPORT" in the
Operation section of this manual).
While learning howto use your tractor, pay ex-
tra attention to the following important items:
_f Engine oil is at proper level,
J" Fueltank is filled with fresh, clean, regular
unleaded gasoline.
J
Become familiar with all controls, their
location and function,
Operate them
before you start the engine,
v f Be sure brake system is in safeoperating
condition.
See the figures that are shown for replacing
_
Be sure Onerator Presence S_,stemand
"motion a:ndmoWetbladedrivebeltsirithe
............. Reverse C_neration System ('F_OS_ are ......
Service andAdjustments section ofthis man-
_
_
_
working properly (See the Operation and
ual. Verify that the belts are routed correctly.
Maintenance sections in this manual).
CHECK
BRAKE SYSTEM
After you learn how to operate your tractor,
check to seethatthe brake is operating prop-
erly, See"TO CHECK BRAKE" inthe Service
and Adjustments section of this manual.
J" It is important to purge the transmission
before operating your tractor for the first
time. Fol!owproper startingand transmis-
sion purging instructions (See'%0 START
ENGINE"and "PURGETPdkNSMISSION"
inthe Operation section of this manual).
Publicidad
