ACCESORIOS
0398 145 211
Floating welding head
A floating welding head holds the torch of the
welding or cutting equipment at a constant
height above the surface during the work.
To enable correct weaving motions even in
troublesome positions the weaving unit can
be fitted with supports for turning and tilting.
0398 145 106
Torch holder universal Ø15-30 mm
System features different torch holders for
different torches and applications. Railtrac™
B42V comes with a universal torch holder
(Ø10-22 mm) and adjusters as standard.
0398 145 101
Torch holder for ESAB PSF torches
0398 145 202
Tilt bracket Railtrac™ B42V
The tilt bracket enables the Railtrac™ to
weave when welding fillet joints. It is mounted
between drive and weaving unit. The weaving
unit can be tilted from 0 to 60 degrees.
0398 145 203
Turning bracket B42
The turning bracket is used to change the
angle of the weaving unit at ±22 degrees from
travel direction.
0398 145 211
Floating head
This component helps maintain constant
stick-out at the welding torch or cutting torch.
0457 467 880
Transformer 230 V AC
0457 467 882
Transformer 115 V AC
0457 360 880
Connection cable ESAB, 12 + 23-pin
0457 360 886
Connection cable universal, for start/stop
wire feeder, only with 12-pin
0398 146 120
Quick-extension bracket for flexible rail
The quick-extension bracket facilitates rapid
mounting and dismounting when using two
rails.
0463 473 001
Release in November 2016
Release in November 2016
- 26 -
© ESAB AB 2016