Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
•
and ordinances. Save these instructions for local
inspector's use.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
TOOLS YOU MAY NEED
Adjustable Wrench
1/4
Compression Nut
22
—
Observe all governing codes
can vary Water Line
Installation 30 minutes
Pencil
Pliers
Level
Refrigerator
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway,
removed.
• To remove the refrigerator doors, see the Installing
the Refrigerator section.
WATER SUPPLY TO THE ICEMAKER AND
DISPENSER
If the refrigerator has an ice maker, it will have to
be connected to a cold water line. A GE Appliances
water supply kit (containing tubing, shutoff valve,
fittings and instructions) is available at extra
cost from your dealer, by visiting our website at
GEAppliances.com (in Canada at
GEAppliances.ca) or from Parts and Accessories,
888.959.8688 (in Canada 1.800.661.1616).
1/8
1/4 &
Allen (Hex) Wrenches
1/8
Phillips-Head Screwdriver
1/4
Tape Measure
Torx T20, T25
49-1000713 Rev. 1